Spindles
Please Phone first to check availability.
Gold spindles
Ref: 2080
We have 28 of these left now measuring between 35 to 37.5 inches long with a round cross section where they were leaded into a stone stair. This is our problem with getting spindles, we have to leave ...
handrail
Ref: 1937
We seem to have bought rather a lot of handrail lately which is good as we were running low. We generally only take straight runs (and some of these are over 14 feet long) but we have a few twists and...
brown cast iron barley twist spindles
Ref: 1862
Approx 40 of these cast iron spindles as of nov 2014 which measure 38 inches to the base plate. The spindles have been leaded into these plates which were then bolted onto a metal platform, but they a...
iron spindles
Ref: 1800
Latest batch of cast iron spindles, these ones fresh from a demolition yard. About 40 available plus a matching newel post. They all have iron 'shoes' at the base where they were fixed to the floor, b...
quarriers spindles
Ref: 1643
We have 27 of these pitch pine spindles which came from the old church in Quarriers village, by Bridge of Weir. If cut straight, they are 24 inches high....
slim stripped spindles
Ref: 1642
Only 9 of these rather slender spindles which came from Edinburgh.Min 30 inches high....
Byers road spindles
Ref: 1641
We have 37 of these lovely spindles with carved flowers on which appear to be some type of hardwood, teak perhaps?.We bought them after a fire devastated the property. They are 26.5 inches tall (24.5 ...
Ol Kilpatrick spindles
Ref: 1640
We have 16 of these from an old church building in OldKilpatrick. One of my favourite spindles, pitch pine and if trimmed to be straight cut, varying in length from 33 to 36" tall....
barley twist spindles
Ref: 1639
pitch pine spindles that came from a church in Fife. All are cut straight and are 31.5 inches tall. The main block is 2" across. Dating from the 1850's...
pitch pine spindles
Ref: 1638
We have 29 of these from a house that was demolished in Caldercruix a while back. If you were to cut off the angled bits you would end up with a height of 27". The main blocks are 3 inches wide, so th...
cast iron spindles
Ref: 1505
The trouble we went to in order to get these. They are between 33.5 and 36 inches tall and we have 24 available. For those who are interested, they came from an old church in Parkhead in...
cast iron spindles
Ref: 1388
We have about 120 of these unusually chunky spindles in stock just now, with the possibility of getting another 100 or so in a few weeks. They came from a school built in the 1890's, and thats why the...
wooden balustrades
Ref: 1271
Pitch pine spindles from about 1870. 6 for a landing at 30 inches tall and 24 cut at an angle which are a bit shorter....
cast iron barleytwist spindles
Ref: 1253
We have about 90 of these from a tenement off the Royal Mile in Edinburgh. The bottom stair fixing bits have been leaded on but come off easily enough. Roughly 34 inches tall. They were removed...
cast iron spindle
Ref: 1235
Only 7 of these available, plus a couple of others that are close. Measuring 36 inches tall. Info correct as of 26/7/2011....
wooden spindles
Ref: 1045
Apologies if these are already on the site, but we have about 39 of these made from a wood which I don't recognize, a hardwood of some type.They are only 26 inches (min) high as they sat on a closed s...
wood spindles
Ref: 1044
we have 17 of these available at 30 inches tall. They are from about 1910 and I think they are Douglas Fir/Oregon Pine which is quite a dark wood....
cast iron spindles
Ref: 919
Taller than average spindles in a fetching pink colour. They are 45 inches tall and have been used internally but would be pretty good as outside spindles. I haven't counted them but my memory of unlo...
handrail
Ref: 812
General pic of some of our handrails. we generally only keep long straight lengths. some of them come with the nice ends which are called 'monkeys tails' or 'cats paws' depending on the design...
Cast Iron Spindles
Ref: 790
Fairly hefty spindles.29 available at between 36 and 43 inches tall. Info correct as of 20/6/13...
Cast Iron Spindles
Ref: 789
We got a lot of these from a church that was being pulled down in Greenock (I believe the front of the church was going to be shipped to America) There were 2 staircases so we have a lot of them. We h...
Cast iron newel posts
Ref: 788
As well as having lots of iron spindles, we also have a dozen or so newel posts which are basically extra chunky versions of the spindles. ...
Cast Iron Spindles
Ref: 787
We have 5 of these available. 3 at 36"tall and 2 at 37"tall. Info correct as of 25/7/2011....
Cast Iron Spindles
Ref: 696
7 available at 42 inches from an old church in wishaw built in the 1820's. The top of the spindles are angled as they were on a stair, so if you wanted to have them on a balcony, you would have to tri...
Contact Details
Unit 1 Albion Centre
1394 South Street
Glasgow
G14 OAP
Mob: 07766 502910
Tel: (0141) 958 1113
Opening times
10.30-5 Monday to Friday
12-5 Saturday
Map (click for maps)
